The TL1240 Series illuminated tact switch offers multiple LED options, reliable dome technology, independent LED leads, multiple cap options and LED color matching upon request.

Applications can be found in the consumer electronics and telecommunications markets, along with medical devices, audio and visual, computer/peripherals, and testing/instrumentation.

Certifications

SPECIFICATIONS:

RATING: 50mA 12VDC
MECHANICAL LIFE: 100,000 Cycles
CONTACT RESISTANCE: 100mΩ (Max.) Typical, Initial at 2-4VDC
INSULATION RESISTANCE: 100MΩ (Min.)
OPERATING FORCE: 160gf ± 50gf
OPERATING TEMP: -20°C to 70°C
TRAVEL: 0.25 +0.2 / -0.1mm

E-Switch offers many standard cap options with some of our tact and pushbutton switch series.

Click here to see our switch cap options

We also have switches that allow for customization of the caps. Many different etchings, markings and graphics can be created for you.

We also have the ability to do custom markings on some of our rocker switches, along with the many tact and pushbutton switches.

The PV3 series illuminated anti-vandal switch is water resistant to IP40/IP65 ratings, and has many functions including long life expectancy. It has a very nice aesthetic appeal, and is tamper resistant.

Popular for use in elevators and kiosk applications, ticket dispensers and industrial-type applications. Also used in security panels and high end electronics.

Certifications

The TM1000 series tilt switch is the first of a new series offered by E-Switch. With 1,000,000 life cycle expectancy, the switch is environmentally friendly and contains no mercury. This tilt switch is triggered when it is tilted 45 degrees of the horizontal.

The TM1000 series switch is best used when orientation or position sensing requirements are needed in the application.

The markets for the TM1000 tilt switch include portable equipment, gaming and computer applications, security devices and medical equipment.

SPECIFICATIONS

ELECTRICAL RATING: 20mA, 24V (AC or DC)
LIFE EXPECTANCY: 1,000,000 Cycles
CONTACT RESISTANCE: 5Ω Max.
INSULATION RESISTANCE: 100MΩ Min. 500VDC
DIELECTRIC STRENGTH: 500VAC for 1 Minute
OPERATING TEMPERATURE: -25°C to 70°C

FUNCTION: SPST

The 100A Series miniature toggle switches are sealed to IP-67 standards.

Applications for this sealed toggle switch include telecommunications, instrumentation, networking and medical equipment devices., among others. Rated to 5 amps at 120 VAC. One or two poles and throws available on this toggle switch, .with both momentary and maintained functions also available to choose from.

Certifications

SPECIFICATIONS
CONTACT RATING: Dependent on Contact Material
MECHANICAL LIFE: 30,000 Make-and-Break Cycles
ELECTRICAL LIFE: 6,000 at Max. Power
CONTACT RESISTANCE: 10mΩ Max. Initial for Both Silver and Gold Plated Contacts
INSULATION RESISTANCE: 1,000MΩ Min.
DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
OPERATING TEMPERATURE: -30°C to 85°C

MATERIALS
CONTACTS: Silver or Gold Plated

The 600 Series miniature slide switches are available with single and double pole options. You can also choose from multiple termination options. You can choose recessed, extended or side actuators. These switches have a plastic switch body housing and are great for the consumer electronics or instrumentation markets.

Certifications

SPECIFICATIONS
CONTACT RATING: Dependent on Contact Plating
MECHANICAL LIFE: 10,000 Operations
CONTACT RESISTANCE: 10mΩ Max. Typical at 2-4VDC
                                              100mA for Both Silver and Gold Plated Contacts
INSULATION RESISTANCE: 1,000MΩ Min.
DIELECTRIC STRENGTH: 1000V RMS at Sea Level
OPERATING TEMPERATURE: -30°C to 85°C

MATERIALS
CONTACTS/TERMINALS: Silver or Gold Plated Copper Alloy

This sealed sub-miniature pushbutton switch has a butt contact design and an IP-67 sealed option. Markets for this switch include telecommunications, networking, computers/servers, performance audio, instrumentation, low power on/off designs, external hard drives and modems.

Certifications

SPECIFICATIONS
RATINGS: 1A 120VAC
LIFE EXPECTANCY: 50,000 Cycles Typical
CONTACT RESISTANCE: 10mΩ Max. Typical at 2-4VDC
                                       100mA For Both Silver and Gold Plated Contacts
INSULATION RESISTANCE: 1,000MΩ Min.
DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
OPERATING FORCE: 200gf ± 50gf

MATERIALS
CASE: Diallyl Phthalate (DAP)
PLUNGER: Glass Filled Nylon or Glass Filled Polyester
BUSHING: Nickel Plated Brass
HOUSING: Stainless Steel
CONTACTS: Silver or Gold Plated Copper Alloy

These LS Series snap action switches are available in gold and 15 amp versions. These switches are  available in a wide variety of actuator, operating force and termination options. Please refer to the PDF data sheet to get more information about these options.

The applications these switches are designed for include the appliance and gaming industries, industrial controls, power tools, vending machines and timing controls.

Certifications

ROHS

UL

VDE

ENEC

SPECIFICATIONS

CONTACT RATING: Gold; 0.4VA Max. at 20VDC or VAC Max.
                                  15Amps at 125/250VAC-UO, CUL, VDE
LIFE EXPECTANCY: 50,000 Cycles Minimum
MECHANICAL LIFE: 1,000,000 Cycles Typical
INSULATION RESISTANCE: 100MΩ Min.
DIELECTRIC STRENGTH: 1,500VAC for 1 Minute
OPERATING TEMP: -25°C to 85°C (std)

MATERIALS
SWITCH HOUSING: High Temperature PBT (UL94 V0)
ACTUATOR BUTTON: High Temperature PBT (UL94 V0)
CONTACTS: Silver (std) or Gold
TERMINALS: Copper Alloy, Plated

KO series keylock switches provide a variety of size and product package options including barrel or flat key options, key code options, and more. There are dozens of types of keylock switches available in our KO series.

These switches work great for security applications, personal transportation vehicles, or elevator/kiosk controls.

Certifications

RoHS and UL certificates are available for these products

Check out our product detail page to get information on each individual model of keylock switches to see the options that work best for you.