Filed under: panel mount pushbutton switch
The 700 series push button switches have a snap-in panel mount option (see the data sheet below for more information about these switches). This pushbutton switch has a snap acting contact design and multiple termination options. Applications and markets for the 700 series panel mount pushbutton switch include telecommunications, networking, computers/servers, performance audio, instrumentation, low power on/off designs and more. Certifications
SPECIFICATIONS
RATINGS: 1A @ 250VAC; 3A @ 120VAC or 28VDC
ELECTRICAL LIFE: 50,000 cycles typical
CONTACT RESISTANCE: 10mΩ max. typical @ 2-4VDC, 100mA for both silver and
gold plated contacts
INSULATION RESISTANCE: 1,000MΩ min.
DIELECTRIC STRENGTH: 1,000V rms at sea level
OPERATING FORCE: 200 ± 50gf
OPERATING TEMP: -30°C to 85°C MATERIALS
CASE: Diallyl Phthalate (DAP)
PLUNGER: Glass filled nylon or glass filled polyester
BUSHING: Nickel plated brass
HOUSING: Stainless steel
CONTACTS: Silver or gold plated copper alloy
E-Switch introduces their newest illuminated pushbutton switch, the RP8100! Offered in a sleek, round design, you can get it in a threaded or snap-in panel mount pushbutton version. There are 5 LED color options for the illumination, or you can get it without illumination. Sealed with an IP67 rating, this pushbutton switch is great for audio/visual, telecommunications, appliance, instrumentation and consumer electronics markets, to name a few. CERTIFICATIONS
SPECIFICATIONS
CONTACT RATING: 125 mA @ 125 VAC; 100mA @ 50VDC
LIFE EXPECTANCY: 500,000 cycles at full load
CONTACT RESISTANCE: 50mΩ max. (initial)
INSULATION RESISTANCE: 1,000MΩ min. @ 500VDC
DIELECTRIC STRENGTH: 1,000 VAC rms.
OPERATING FORCE: 300 gf ± 100 gf
OPERATING TEMPERATURE: -30°C to +85°C
CONTACT BOUNCE: 10ms max.
TRAVEL: 1.5mm ± .25mm MATERIALS
HOUSING: Nylon
BUTTON: Nylon
TERMINAL CASE: Thermo plastic
TERMINALS: Copper Alloy, plated
CONTACT: Copper Alloy, plated
PA4 series power pushbutton switch is durable, robust and economical. Featuring the popular 13mm x 19mm cutout, this illuminated pushbutton switch has high power ratings. Comes in both standard and water resistant versions and has illuminations options. Certifications:
SPECIFICATIONS
RATING OPTION C:
16A 125/250 VAC [UR, cUR]
16(4)A 250V~ 1E4 T125/55 [ENEC]
RATING OPTION J:
16A 125/250 VAC [UR, cUR]
16(8)A 250V~ 1E4 T125/55 [ENEC]
TEMPERATURE: -20°C to 65°C [UR, cUR]
-20°C to 125°C [ENEC]
ELECTRICAL LIFE: 10,000 Cycles
CONTACT RESISTANCE: 20mΩ Min. at 1A 5VDC
INSULATION RESISTANCE: 100MΩ Min. at 500VDC
DIELECTRIC STRENGTH: 1,000VAC for 1 Minute MATERIALS
UPPER BODY: Polyamide 6/6, UL94 V-2
LOWER BODY: PBT, UL94 V-2
ACTUATOR: Polyamide 6/6, UL94 V-2
Polycarbonate, UL94 V-2
CONTACTS: Silver Alloy
TERMINALS: Silver Plated Copper
|
The LA series illuminated pushbutton switches have an IP65 rating. Come in up to 4 poles and a variety of color options. Now available in a Flush Mount configuration - with an appealing aluminum bezel. Check out this sealed illuminated push button switch today! These pushbutton switches work great for the telecommunications, networking, computers, instrumentation, performance audio and external hard drive industries. Certifications
SPECIFICATIONS
RATING: 5A @250 VAC
8A @125VAC
2A @250VDC
6A @24VDC
MECHANICAL LIFE: ≥100,000 cycles
ELECTRICAL LIFE: ≥50,000 cycles
CONTACT RESISTANCE: 100mΩ max. typical, initial @ 2-4 VDC
INSULATION RESISTANCE: >1,000MΩ
DIELECTRIC STRENGTH: >1,500 volts for 1 minute; >3,000 volts between poles
ACTUATION FORCE: 300g / pole
OPERATING TEMPERATURE: -20°C to 55°C
DEGREE OF PROTECTION: IP65 MATERIALS
SWITCH HOUSING: Polyethermide (PEI)
CONTACT HOUSING: Diallyl phthalate (DAP)
ACTUATOR RING: Polycarbonate (PC)
LENS: Polycarbonate (PC)
CONTACTS: Silver plated copper alloy
TERMINALS: Silver or gold plated copper alloy |
|
The ULP series lighted push-button switches provide a positive tactile response and many color options are available. The applications for these switches include telecommunications, external hard drives and modems, instrumentation, performance audio, computers/servers, networking and low power on/off designs. Certifications
SPECIFICATIONS
CONTACT RATING: Gold, 0.4VA Max @ 28V (AC or DC)
Silver, 0.5A @ 25VDC; 0.2A @ 250 VAC
MECHANICAL LIFE: 1,000,000 cycles
ELECTRICAL LIFE: 200,000 cycles silver
200,000 cycles gold
CONTACT RESISTANCE: 50mΩ silver, 100mΩ gold
INSULATION RESISTANCE: >100MΩ @ 500 VDC
DIELECTRIC STRENGTH: 1000VAC for 60 seconds
ACTUATION FORCE: 200 /- 100 grams SPDT
300 /- 150 grams DPDT
OPERATING TEMPERATURE: -20°C to +70°C |
E-Switch has a large variety of illuminated pushbutton switches for your applications. Some of the more popular illuminated pushbutton switch series include the LP series:
|
